VANI INSTITUTE for GATE coaching: April 2013

Tuesday, April 9, 2013

M TECH ADMISSION GUIDELINES FOR CHEMICAL ENGINEERING

M.Tech Admission 2013-14 Chemical Engineering

GATE 2013-14 M.Tech. Admission 2013 Counselling & Guideline forChemical Engineering ( CH )

You must choose these specialization preferences for M.Tech admission 2013:

o Process Modelling

o Simulation

o Computer Aided Design

o Optimization & control

o Particulate Systems

o Fluid Mechanics

o Separation Process

o Petrochemical

o Electrochemical processes

o Thermodynamics

o Colloid & Interfacial Science

o Microstructure Engg.

o Supercritical Fluid Extraction

o Membrane Processes

o Environmental Engineering

o Bioprocess engineering and food engineering.

Selection Factors:
1. Rank / Score category-wise obtained in GATE 2013
2. Percentage in B.Tech/ B.E.
3. Written Test (Institutes)
4. Interview

o In Case of GATE Score : The GATE score is given 70% weight age and remaining 30% Weight age is for the written test / Interview. The exact ratio may differ so before you apply just verify once through official notification.

IIT Roorkee : GATE 2011 cutoff : 76.33
IIT Roorkee : GATE 2012 cutoff : 73.33
IIT Delhi : GATE 2013 cutoff : Chemical Engineering : General 496 OBC 480 SC 403 ST 344 PD 344
GATE 2013 Cutoff for NIT Warangal : General 352 OBC 328 SC 305 ST 300
For general category candidate below are Rank division and possible specialization:

IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.
RANK upto 200 : Interview call from applied PSU’s.
RANK upto 400 to 600: IITs & NITs.

Rank 600 to 800: All NITs, deemed universities, Top colleges like BHU, NSIT (with interview and written test).Other Universities like JNTU, Osmania etc.
Rank 800 to 1100: For such candidate good level of private engineering colleges are best option where admission are direct or through ( Written with interview ). BITs, Pilani, Anna University, PSG, Coimbatore, Anna University, Pondicherry university, UPTU, Punjab Tech. University, MDU
For SC/ST/OBC category candidates seats are reserved with lower Rank at almost IITs, NITs and reputed institute. ( For rough calculation of rank distributions ( SC/ST : General Rank+600) ( SC/ST : General Rank+400)

Stipend / Scholarship for M.Tech Students: The stipend/Scholarship is awarded by reputed institution; you may verfy at the time of admission.
Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a student may get good specialization so if you are financially sound then you must try in case your gate score is low.

Our suggestion to gate qualifiers:

o First select suitable Specialization with proper selection of college as per your rank or gate score.

o It is strongly advised to apply more than three options as other factor (No. of Applicants, left seats with Higher score/ luck factor) may keep you in safe side.

o If you have got relatively low scores in the GATE 2013 then apply at colleges suitable to your score and apply at those colleges where written / Interview selection are preferable.

o To know the updates of reputed institution you must check any such update at their respective website or leading newspapers.

o Before you apply at any institute ensure all eligibility condition and must go into detailed of information brochure of each college.

o If you got admission update us your GATE Score with details of specialization and college allotted In case of any assistance or your queries are welcome.

M TECH ADMISSION GUIDELINES FOR CSE

M.Tech Admission 2013-14 Computer Science & IT

GATE 2013-14 M.Tech. Admission 2013 Counseling & Guideline for Computer Science & IT (CS & IT)

You must choose these specialization preferences for M.Tech admission 2013:

Computer Graphics, Vision and Multimedia
Computer Networks and Distributed Systems
Algorithms and Complexity
Formal Methods in Software
Embedded Systems and Architecture
Software Systems
Computer Systems and Hardware

Database and Information Systems
Programming languages
Artificial Intelligence

Selection Factors: 1. Rank / Score category-wise obtained in GATE 2013 2. Percentage in B.Tech/ B.E.

3. Written Test ( Institutes) 4. Interview

Computer Science M.Tech at IIT Bombay: GATE 2013-14

Eligibility: General: 60% , SC/ST/PD : 55% B.E./B.Tech
GATE 2013 Score : Gen : 750 SC/ST/ PD : 500 OBC : 675
Mode : 1. GATE score. 2. Written + interview.

Graduate from IITs with a minimum CGPA of 8.0 are exempted from this requirement. ( All IITs )

Computer Science M.Tech at IIT Roorkee: GATE 2013-14

Eligibility: General: 60% , SC/ST/PD : 55% B.E./B.Tech
Seats: 54 Eligibility: Bachelor’s degree in any branch of Engg./ Tech.
GATE 2013 Marks : Gen : 90 SC/ST/ PD : 75 OBC : 85
Candidates with AMIE certificate are not eligible to apply
In Case of GATE Score : The GATE score is given 70% weight age and remaining 30% Weight age is for the written test / Interview. The exact ratio may differ so before you apply just verify once through official notification.

ONLY GATE Score is required at IISC Bangalore, IIT Madras ,IIT Kharagpur, IIR Roorkee.

For general category candidate below are Rank division and possible specialization:

IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.
RANK upto 600 : Interview call from applied PSU’s.
Rank 600 to 1000: In IITs and all the above specializations in NIT's, Kanwal Rekhi School of information Technology, IIT, Bombay ( For both CSE and IT). (With interview process in IITs) , Indian Statistical Institute, Calcutta.
Rank 1000 to 2000: Lower Specializations at NITs, good Specializations at Pvt Engineering colleges with possibility of Better Specializations at BHU,NSIT,DCE, IIITs, BITS, Pilani, Mesra, BMSE Bangalore, SJCE, Pondicheerry Engineering College.

Rank more than 2000 : For such candidate good level of private engineering colleges are best option where admission are direct or through ( Written with interview ). BITs, Pilani, Anna University, PSG, Coimbatore, Anna University, Pondicherry university, UPTU, Punjab Tech. University, MDU, Jadavpur University.
For SC/ST/OBC category candidates seats are reserved with lower Rank at almost IITs, NITs and reputed institute. ( For rough calculation of rank distributions ( SC/ST : General Rank+600) ( SC/ST : General Rank+400)
In IIIT Hyderabad, Central University-Hyderabad the admission is based on written test and interview.

Preference of IITs : IIT Delhi / Kanpur / Madras / Bombay / Kharagpur / Roorkee / Guwahati
Preference of NITs : Trichy / Warangal / Calicut / Suratkal / Allahabad / Hamirpur / Rourkela / Bhopal / Jamshedpur / Surat / Jaipur / Kurushetra / Durgapur /Nagpur / Patna / Raipur / Jalandhar / Agartala / Silchar / Srinagar
Stipend / Scholarship for M.Tech Students : The stipend/Scholarship is awarded by reputed institution, you may verfy at the time of admission .
Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a students may get good specialization so if you are financially sound then you must try in case your gate score is low.

Our suggestion to gate qualifiers:

First select suitable Specialization with proper selection of college as per your rank or gate score.
It is strongly advised to apply more than three options as other factor (No. of Applicants, left seats with Higher score/ luck factor) may keep you in safe side.
If you have got relatively low scores in the GATE 2013 then apply at colleges suitable to your score and apply at those colleges where written / Interview selection are preferable.
To know the updates of reputed institution you must check any such update at their respective website or leading newspapers.
Before you apply at any institute ensure all eligibility condition and must go into detailed of information brochure of each college.
If you got admission update us your GATE Score with details of specialization and college allotted In case of any assistance or your queries are welcome.

M TECH ADMISSION GUIDELINES FOR MECHANICAL ENGINEERING

M.Tech Admission 2013-14 Mechanical Engineering

You must choose these specialization preferences for M.Tech admission 2013:
1. Design sciences & manufacturing sciences
2. Industrial management (Humanities department)
3. Thermal Engineering / Thermal sciences
4. Automobile Engineering
5. Aerospace engineering
6. Ocean engineering
7. Metallurgical sciences
8. Any other specialization of your interest
9. Manufacturing Engineering
10. Industrial Safety Engineering
11. Product Design and Development
# Candidates with a Bachelor’s degree in Production Engineering

Selection Factors:

1. Rank / Score category-wise obtained in GATE 2013 2. Percentage in B.Tech/ B.E.

3. Written Test ( Institutes ) 4. Interview

Direct Admission ( Few specialisation ) : IIT-KANPUR, IIT-BOMBAY, IIT-ROORKEE, IIT-GUWHATI & IISc-BANGALORE : GATE rank/score

Mechanical Engineering M.Tech at IIT Delhi: GATE 2013-14

Admissions based on GATE Score + INTERVIEW

Mechanical Engineering M.Tech at IIT Roorkee: GATE 2013-14

Eligibility: General: 60% , SC/ST/PD : 55% B.E./B.Tech
GATE Score 2012 : 92.00 GATE Score 2011 : 87.67
Mode : 1. GATE score. 2. Written + interview.

Graduate from IITs with a minimum CGPA of 8.0 are exempted from this requirement. ( All IITs )

Mechanical Engineering M.Tech at IIT Kharagpur: GATE 2013-14

Eligibility: General: 60% , SC/ST/PD : 55% B.E./B.Tech
GATE Score 70% and Interview 30% weight age.
Link : http://gate.iitkgp.ac.in/mtech

ONLY GATE Score is required at IISC Bangalore, IIT Madras ,IIT Kharagpur, IIR Roorkee.

For general category candidate below are Rank division and possible specialization:

IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.

RANK upto 800(99 percentile+) : Interview call from applied PSU’s.

Rank 800 to 1000 (98-99 percentile+): In IITs and all NIT's.

Rank 1000 to 1400(97-98 percentile+): Lower Specializations at NITs, good Specializations at Pvt Engineering colleges with possibility of Better Specializations at NIFFT-Ranchi, Thapar –Patiala,VJTI-Bombay BHU, NSIT, DCE, IIITs, BITS, Pilani, Mesra, BMSE Bangalore, SJCE, Pondicheerry Engineering College.
NIFFT, Ranchi (Only GATE): Foundry and manufacturing Engineering.
NIT Trichy ( Top option for Mech student under NIT ): Admissions are based on GATE score + written test + interview.

DCE : ONLY GATE SCORE
Rank more than 1400 (97-96 percentile+) : For such candidate good level of private engineering colleges are best option where admission are direct or through ( Written with interview ). BITs, Pilani, Anna University, PSG, Coimbatore, Anna University, Pondicherry university, UPTU, Punjab Tech. University, MDU, Jadavpur University, PSG Coimbattor.
PSG college of Engg. Coimbattor : GATE + Tamilnadu PG test .

For SC/ST/OBC category candidates seats are reserved with lower Rank at almost IITs, NITs and reputed institute. ( For rough calculation of rank distributions ( SC/ST : General Rank+600) ( SC/ST : General Rank+400)
In IIIT Hyderabad, Central University-Hyderabad the admission is based on written test and interview.

Stipend / Scholarship for M.Tech Students : The stipend/Scholarship is awarded by reputed institution, you may verfy at the time of admission .
Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a students may get good specialization so if you are financially sound then you must try in case your gate score is low.

Our suggestion to gate qualifiers:

First select suitable Specialization with proper selection of college as per your rank or gate score.
It is strongly advised to apply more than three options as other factor (No. of Applicants, left seats with Higher score/ luck factor) may keep you in safe side.
If you have got relatively low scores in the GATE 2013 then apply at colleges suitable to your score and apply at those colleges where written / Interview selection are preferable.
To know the updates of reputed institution you must check any such update at their respective website or leading newspapers.
Before you apply at any institute ensure all eligibility condition and must go into detailed of information brochure of each college.
If you got admission update us your GATE Score with details of specialization and college allotted In case of any assistance or your queries are welcome.

M TECH ADMISSION GUIDELINES FOR EEE

M.Tech Admission 2013-14 Electrical Engineering EE

You must choose these specialization preferences for M.Tech admission 2013:

Communication Systems
Power Systems And Power Electronics
Micro Electronics And VLSI Design
Control And Instrumentation
Photonics
Power Systems and Instrumentation
Microelectronics
High Voltage Engineering (Only IISC)
Power Electronics (Machine Drives)
Digital Electronics
Interdisciplinary courses like Satellite Technology, Internet Science, Aerospace, Management, Industrial Engineering

Selection Factors: 1. Rank / Score category-wise obtained in GATE 2013 2. Percentage in B.Tech/ B.E. 3. Written Test (Institutes) 4. Interview

In Case of GATE Score : The GATE score is given 70% weight age and remaining 30% Weight age is for the written test / Interview. The exact ratio may differ so before you apply just verify once through official notification.

ONLY GATE Score is required at IISC Bangalore, IIT Madras ,IIT Kharagpur, IIR Roorkee.
IIT Roorkee GATE-2011 Cutoff For M.Tech : 74.00 EE
IIT Roorkee GATE-2012 Cutoff For M.Tech : 70.33 EE

For general category candidate below are Rank division and possible specialization:

IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.

RANK upto 1000 : Interview call from applied PSU’s.

RANK upto 400: Communication Systems, VLSI / Micro Electronics in IITs.

Rank 400 to 600: Communication Systems, VLSI / Micro Electronics (With interview process in IITs).

Rank 600 to 1000: Rest specializations (PE, PSI, SS,CS,CI, Inter-disciplinary) in IITs and all the above specializations in NIT's.

Rank 1000 to 1600: All NITs, deemed universities, Top colleges like BHU,ISM, BIT Mesra ,NSIT (with interview and written test).Other Universities like JNTU, Osmania etc.

Rank 1600 to 2000: Lower Specializations at NITs, good Specializations at Pvt Engineering colleges with possibility of Better Specializations at BHU, NSIT, DCE, IIITs.

Preference of IITs : IIT Delhi / Kanpur / Madras / Bombay / Kharagpur / Roorkee / Guwahati

Preference of NITs : Trichy / Warangal / Calicut / Suratkal / Allahabad / Hamirpur / Rourkela / Bhopal / Jamshedpur / Surat / Jaipur / Kurushetra / Durgapur /Nagpur / Patna / Raipur / Jalandhar / Agartala / Silchar / Srinagar

In IIIT, Hyderabad, the admission is based on written test and interview

Stipend / Scholarship for M.Tech Students: The stipend/Scholarship is awarded by reputed institution; you may verify at the time of admission.
Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a student may get good specialization so if you are financially sound then you must try in case your gate score is low.

Our suggestion to gate qualifiers:

First select suitable Specialization with proper selection of college as per your rank or gate score.
It is strongly advised to apply more than three options as other factor (No. of Applicants, left seats with Higher score/ luck factor) may keep you in safe side.
If you have got relatively low scores in the GATE 2013 then apply at colleges suitable to your score and apply at those colleges where written / Interview selection are preferable.
To know the updates of reputed institution you must check any such update at their respective website or leading newspapers.
Before you apply at any institute ensure all eligibility condition and must go into detailed of information brochure of each college.
If you got admission update us your GATE Score with details of specialization and college allotted In case of any assistance or your queries are welcome.

*****************ALL THE BEST*****************

M.TECH ADMISSION GUIDLINES FOR ECE

M.Tech Admission 2013 Electronics & Communication

You must choose these specialization preferences for M.Tech admission 2013:
1. Communication Systems.
2. VLSI / Micro Electronics.
3. Electronic Design & Technology (Chip Design)
4. Digital Electronics
5. Systems & Signals
6. Computer Science, if interested.
7. Instrumentation & Controls
8. Interdisciplinary courses like Satellite Technology, Internet Science, Aerospace, Management and Industrial Engineering.

Selection Factors: 1. Rank / Score category-wise obtained in GATE 2013 2. Percentage in B.Tech/ B.E. 3. Written Test (Institutes) 4. Interview

ONLY GATE Score is required at IISC Bangalore, IIT Madras ,IIT Kharagpur, IIR Roorkee.
IIT Delhi admits Through : 1. GATE Score ( Without Test / Interview : 75% marks or 8.5 CGPA ) 2. GATE Score (With Written Test / Interview: 60% marks or 6.75 CGP )

IIT Delhi GATE-2011 Cutoff For M.Tech : Communication Engg. GEN: 810 OBC: 780 SC: 545 ST: 495 PH: 495
IIT Roorkee GATE-2011 Cutoff For M.Tech : 91.33
IIT Roorkee GATE-2012 Cutoff For M.Tech : 67.00

For general category candidate below are Rank division and possible specialization:

IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.

RANK upto 1000 : Interview call from applied PSU’s.

RANK upto 400: Communication Systems, VLSI / Micro Electronics in IITs.

Rank 400 to 600: Communication Systems, VLSI / Micro Electronics (With interview process in IITs).

Rank 600 to 1000: Rest specializations (EDT, DE, SS,CS,IN,Inter-disciplinary) in IITs and all the above specializations in NIT's.

Rank 1000 to 1600: All NITs, deemed universities, Top colleges like BHU,ISM, BIT Mesra ,NSIT (with interview and written test).Other Universities like JNTU, Osmania etc.

Rank 1600 to 2000: Lower Specializations at NITs, good Specializations at Pvt Engineering colleges with possibility of Better Specializations at BHU, NSIT, DCE, IIITs.

Preference of IITs : IIT Delhi / Kanpur / Madras / Bombay / Kharagpur / Roorkee / Guwahati

Stipend / Scholarship for M.Tech Students: The stipend/Scholarship is awarded by reputed institution; you may verfy at the time of admission.

Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a student may get good specialization so if you are financially sound then you must try in case your gate score is low.

Our suggestion to gate qualifiers:

First select suitable Specialization with proper selection of college as per your rank or gate score.
It is strongly advised to apply more than three options as other factor (No. of Applicants, left seats with Higher score/ luck factor) may keep you in safe side.
If you have got relatively low scores in the GATE-2013 then apply at colleges suitable to your score and apply at those colleges where written / Interview selection are preferable.
To know the updates of reputed institution you must check any such update at their respective website or leading newspapers.
Before you apply at any institute ensure all eligibility condition and must go into detailed of information brochure of each college.
If you got admission update us your GATE Score with details of specialization and college allotted In case of any assistance or your queries are welcome.

****************ALL THE BEST****************